As an Amazon Associate I earn from qualifying purchases.1. sourcing map
Sourcing map 40mm Pipe Cover Decoration PP Plastic Water Pipe Escutcheon White 4pcs
sourcing map - Applications - widely used in water pipes, drain pipes, angle valves, faucets, etc. Size - fit pipe outer diameter: 40mm / 1. 57";total size: 72 x 13mm / 2. 83" x 051"d*h. Featrue - easy installation, no tools required, just snap together the buckle and the installation finished.
Function - when the pipe passes through the wall, it leaves a gap. Can be decorated with a pipe cover. Material - made of PP plastic, fit many occasions.
2. Merriway
Merriway BH02913 Waste Compression Straight Connector, White, 40mm
Merriway - Waste Compression Fittings. Manufacturer: Merriway. Pack of 1 x waste Compression Straight Connector 40mm. Heating And Plumbing Accessories. If instructions for fixing, assembly or maintenance of the products are included in the packaging then please ensure that they are followed.
| Brand | Merriway |
| Manufacturer | Merriway |
| Height | 15 cm (5.91 Inches) |
| Length | 5 cm (1.97 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 22.5 cm (8.86 Inches) |
| Part Number | BH02913 |
| Model | BH02913 |
3. Pipestation
White, Pack of 2, Pushfit 40mm Waste Pipe 90 Degree Bend
Pipestation - This product is made to be installed with 40mm pipe or fittings. Push pipe waste fittings incorporate a rubber O-Ring and should be fixed in position to prevent uncoupling over time. If your pipe or existing fittings do not measure 40mm, or has ABS printed on the pipe or fittings, this fitting is not compatible and you will require 43mm solvent weld fittings.
Push fit waste pipe bend designed to join 2 waste pipes in a gradual 45 or 135 degree configeration, increasing flow rate due to the gentle bend. This listing is for a Pack of 2. Pushfit white Waste Pipe Fitting.
4. MSL
White, Pushfit 40mm Waste Pipe 90 Degree Tee
MSL - If your pipe or existing fittings do not measure 40mm, or has ABS printed on the pipe or fittings, this product is not compatible and you will require 43mm solvent weld fittings. Pushfit white Waste Pipe Fitting.
Push pipe waste fittings incorporate a rubber O-Ring and should be fixed in position to prevent uncoupling over time. This listing is for a Pack of 1. Pusfit waste pipe tee designed to join three waste pipes in a 90 degree tee configeration. This product is made to be installed with 40mm pipe or fittings.
| Brand | MSL |
| Manufacturer | MSL |
| Weight | 0.07 kg (0.15 Pounds) |
| Part Number | PRWPFT-40W |
5. Merriway
White, 40mm, Merriway BH02915 Waste Compression 90 Degree Bend
Merriway - Heating And Plumbing Accessories. If instructions for fixing, assembly or maintenance of the products are included in the packaging then please ensure that they are followed. Manufacturer: Merriway. Waste Compression Fittings. Pack of 1 x waste compression 90 Degree Bend 40mm.
| Brand | Merriway |
| Manufacturer | Merriway |
| Height | 16.4 cm (6.46 Inches) |
| Length | 12 cm (4.72 Inches) |
| Width | 2.52 |
| Part Number | BH02915 |
| Model | BH02915 |
6. FloPlast
FLOPLAST Solvent White 40mm 43mm Waste Pipe Clip, Bag of 10
FloPlast - This product is made to be installed with 43mm known as 1 1/2 inch solvent weld pipe or fittings. 40mm waste pipe clips. If your pipe or existing fittings measure 40mm, or has PP printed on it, then this product is not compatible and you will require 40mm pushfit or compression fittings.
This listing is for a Pack of 1040mm waste pipe clips grey. 40mm pipe clip.
7. FloPlast
Bag of 2, FLOPLAST 40mm Black Pushfit Waste Pipe Conversion Bend
FloPlast - If your pipe or existing fittings do not measure 40mm, or has ABS printed on the pipe or fittings, this fitting is not compatible and you will require 43mm solvent weld fittings. This product is made to be installed with 40mm pipe or fittings.
40mm push fit elbow. This listing is for a Pack of 2. Being a conversion bend the female end will accept 40mm push fit pipe and the male end is designed to go into a 40mm push fit fittings. 40mm push fit bend.
8. FloPlast
Pack of 2, FLOPLAST 40mm White Pushfit 135 Degree Waste Pipe Bend
FloPlast - 40mm 45 degree bend. This listing is for a Pack of 2. If your pipe or existing fittings do not measure 40mm, or has ABS printed on the pipe or fittings, this fitting is not compatible and you will require 43mm solvent weld fittings.
This product is made to be installed with 40mm pipe or fittings. 45 degree waste pipe bend. 40mm waste pipe 45 degree bend.
9. Merriway
White, 40mm , Merriway BH02916 Waste Compression Tee Connector
Merriway - Pack of 1 x waste Compression Tee 40mm. If instructions for fixing, assembly or maintenance of the products are included in the packaging then please ensure that they are followed. Heating And Plumbing Accessories. Manufacturer: Merriway. Waste Compression Fittings.
| Brand | Merriway |
| Manufacturer | Merriway |
| Height | 17.5 cm (6.89 Inches) |
| Length | 12.5 cm (4.92 Inches) |
| Width | 7.5 cm (2.95 Inches) |
| Part Number | BH02916 |
| Model | BH02916 |
10. sourcing map
Sourcing map PVC Rigid Round Pipe 36mm ID 40mm OD 0.35m White High Impact for Water Pipe,Crafts
sourcing map - Install on the equipment. Pvc material, smooth surface and uniform pipe wall; High impact resistance and easy processing; With good electrical insulation, it can be used as cable sleeve to protect and tidy electrical wires.
The pipes are also widely used in DIY, cable sleeves, etc. The hard pipe is suitable for outdoor use and can be used in direct sunlight. Round pipe, is in size of : 36mm/1. 42-inch inner dia, 40mm/1.
57-inch outer dia, 035m/14-inch total length. The inner wall of pvc pipe is smooth and does not limit the flow of liquid. Pvc rigid pipes are mainly in water pipes. Cut to the length you want; 3. Steps of installation: 1. Prepare a pvc pipe of an appropriate size; 2. Please note : select pvc pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
sourcing map - Applications - widely used in water pipes, drain pipes, angle valves, faucets, etc. Size - fit pipe outer diameter: 40mm / 1. 57";total size: 72 x 13mm / 2. 83" x 051"d*h. Featrue - easy installation, no tools required, just snap together the buckle and the installation finished. Function - when the pipe passes through the wall, it leaves a gap. Can be decorated with a pipe cover. Material - made of PP plastic, fit many occasions.
FloPlast - 40mm 45 degree bend. This listing is for a Pack of 2. If your pipe or existing fittings do not measure 40mm, or has ABS printed on the pipe or fittings, this fitting is not compatible and you will require 43mm solvent weld fittings. This product is made to be installed with 40mm pipe or fittings. 45 degree waste pipe bend. 40mm waste pipe 45 degree bend.
Merriway - Pack of 1 x waste Compression Tee 40mm. If instructions for fixing, assembly or maintenance of the products are included in the packaging then please ensure that they are followed. Heating And Plumbing Accessories. Manufacturer: Merriway. Waste Compression Fittings.
sourcing map - Install on the equipment. Pvc material, smooth surface and uniform pipe wall; High impact resistance and easy processing; With good electrical insulation, it can be used as cable sleeve to protect and tidy electrical wires.
